Model SRI6P B.O.D. Thermoelectric Cooled Incubator, 6.5 Cu.Ft. (120 Bottle) Capacity. Using innovative thermoelectric cooling technology, the LI6P eliminates the need for a refrigeration compressor. This means that these units use 78% less power than alternative models and reduce room air conditioning loads by 75%. They also include 75 pound capacity shelves, which eliminates sagging. These incubators meet APHA specifications for Biochemical Oxygen Demand (BOD) and include a mechanical convection system to ensure even air distribution, digital temperature set controller, over temperature limit control, and a digital temperature display.
A one amp interior outlet allows use of shakers, stirrers, roller bottles or other apparatus. Units are supplied with adjustable leveling feet.
Low Temperature Incubators are ideal for testing of sewage and wastewater, as well as other low and room temperature applications.
"The amazing temperature uniformity of the Shellab SRI20P allowed us to replace two compressor based BOD incubators with just this one unit. Previously, we had to use two units for our samples because the temperature uniformity spread was too large between the top and bottom shelves so that we could really only use the middle shelves. We definitely appreciate having more room in our lab. The slide out shelf is extremely convenient and the shelves in general are the sturdiest that I‚Äôve seen in a BOD incubator. The energy savings of the SRI20P is also a very important feature for me. Clean Water Services is a steward for public health, environmental protection and economic vitality. This goes hand-in-hand with the Shellab SRI20P‚Äôs energy efficiency and the reduction we will see in our lab‚Äôs air conditioning loads."
Jim O‚ÄôReilly, BOD Lab Specialist, Clean Water Services
Shelving:2 Supplied, Adjustable
Temperature Control:0.1 °C Display Increments
Temperature Uniformity:+/- 0.5 °C at 20 °C
Temperature Range:15 °C to 40 °C (at 20 °C ambient)
Exterior Dimensions WxDxH in. (cm):30 x 31.5 x 33.5 (76.2 x 80.1 x 85.1)
Interior Dimensions WxDxH in. (cm):25.5 x 24 x 18.5 (64.7 x 60.9 x 46.9)
Capacity:6.5 Cu.Ft. (185 L)
Capacity of Standard B.O.D. Bottles:120
Maximum Energy Consumption (W):480/660
All specifications are determined by using average values on standard equipment at an ambient temperature of (22 ¬± 3) °C and line voltages within +/-10% of unit type (115V/230V). Temperature specifications follow DIN 12880 methodology. We reserve the right to change specifications at any time.